Products & raw materials

Photoluminescent raw materials for industry and series production

Name: LUMENTIFY
Address: Geschwister-Scholl-Str. 4, Altenburg, Thüringen, 04600, DE
Telephone: +49 151 55687366

LUMENTIFY supplies glow-in-the-dark pigments and photoluminescent raw materials as the building block for your products – not as a finished end product, but as the material basis for your own processing.

Open white pail and steel drum of photoluminescent pigment powder in a warehouse, white pails on a pallet behind

Photoluminescent pigment, yellow-green, as a heap with a scoop, glowing in the dark — Glow pigments in daylight and in the dark – drag the slider, choose a colour.

Photoluminescent pigment, yellow-green, as a heap with a scoop, in daylight — Glow pigments in daylight and in the dark – drag the slider, choose a colour.

Raw material 01

Glow-in-the-dark pigments

Phosphorescent pigments for a long-lasting afterglow – as glow powder in various particle sizes, matched to your application and carrier material.

Base: Europium/dysprosium-doped strontium aluminate, SiO₂-coated
Glow colours: Yellow-green (brightest), blue-green, blue; further shades tinted
Particle size: Fine to coarse – finer grades for smooth, thin layers, coarser grades for more brightness
Loading: Guide value 15–20 % relative to the carrier, 30–50 % in opaque carriers
Used in: Paints & Coatings, Plastics & Masterbatch, Silicone & Resins, 3D Printing, Safety & Escape Routes, Toys & Decor

Glow granules (up to 1 mm) in a glass dish, green, glowing in the dark — Glow granules up to 1 mm in daylight and in the dark – drag the slider, choose a colour.

Raw material 02

Glow granules

Pure strontium aluminate in grain sizes up to 1 mm – a photoluminescent raw material for integration into your own material systems, visible as individual grains.

Material: Pure strontium aluminate – the luminescent material itself, without binder
Grain size: Up to 1 mm maximum; coarser sizes from 4 mm are available as resin-based glow stones
Surfaces: Press into the fresh surface and grind, or embed under a clear, walk-resistant top coat (epoxy, exterior lacquer)
Casting & filling: Cast into resin as visible grains; as filling for vessels and light stores – hydrolysis-resistant, even permanently in water
Note: Mixed into a material, the grain disappears below the surface; the effect is created where it stays visible
Used in: Paints & Coatings, Silicone & Resins, Safety & Escape Routes, Toys & Decor

Glow stones (approx. 2 cm), green, glowing in the dark — Glow stones (approx. 2 cm) and glow pebbles (4–8 mm) in daylight and in the dark – drag the slider, make a choice.

Glow stones (approx. 2 cm), green, in daylight — Glow stones (approx. 2 cm) and glow pebbles (4–8 mm) in daylight and in the dark – drag the slider, make a choice.

Raw material 03

Resin-based glow stones

From 4 mm upwards, we make glow stones and pebbles from resin and glow pigment – in any colour, size and grain, matched to your product or project.

Material: Resin with embedded glow pigment
Colours: Any colour possible; yellow-green and blue-green glow brightest
Sizes & grains: From 4 mm, all sizes and grains possible
Uses: Paths, garden and landscaping, embedding in resin or concrete surfaces, decor ranges
Used in: Silicone & Resins, Toys & Decor

Quantities

From samples to bulk

You need glow pigments not by the gram but by the kilogram, in large containers or as recurring production quantities? LUMENTIFY supplies from the first samples to bulk quantities.

Samplesfor testing in your production
Project quantityfor pilot runs and individual projects
Series quantityfor recurring production
Bulk quantityin large containers

Advice

Technical advice, not a sales pitch

We help you choose the right afterglow material for your requirements – from particle size and loading to processing in your carrier material.

Data sheets

Technical data and the safety data sheet (also as readable text) are in the downloads section.

Go to downloads

Material data at a glance

Strontium aluminate glow pigments
Material	Europium/dysprosium-doped strontium aluminate, inorganic
Surface	SiO₂-coated and therefore hydrolysis-resistant – even permanently in water
Thermal stability	Glow pigment 1,100–1,200 °C; from approx. 150 °C use only untinted pigments (light, whitish daylight colour)
Glow colours	Yellow-green (base shade, brightest), blue-green, blue; further shades tinted and weaker
Afterglow duration	Yellow-green, blue-green, blue: more than 10 hours in total darkness, as a faint glow after 1–2 hours
Excitation	UV content (daylight, UV from 365 nm) charges fastest, artificial light more slowly
Guide loading	15–20 % relative to the carrier material, 30–50 % in opaque carriers
Ageing	around 5 % loss of brightness over 10 years (empirical value)

The right material for your application?

Tell us about your application, carrier material and quantities – we recommend raw material, particle size and loading and put together suitable samples.

Discuss your project

You can also reach us directly: +49 151 55687366 info@lumentics.de